For expert advice call
0844 8808055

3,500kg industrial flake ice maker

The Ziegra UBE 3.500 EV CO² ice maker is designed to be connected to an existing central CO² refrigeration system. It can make a maximum of 3,500kg granular flake ice per day in one of three sizes.

UBE 3.500 EV CO² main features

  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Three sizes of ice flake available: micro, midi or macro to suit a wide range of applications
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard
  • Designed for connection to the sub-critical part of a CO² refrigeration system
  • Powder coated frame and panels (stainless as option)

The machine can be mounted on a support frame and feed ice into ice carts or dedicated ice storage bin / bunker, with a number of ice discharge options to suit your application.

 

  

Model

UBE 3.500 EV CO²

3,500kg / 24h nominal capacity at

15°C water temperature

Dimensions (W x D x H)

800 x 1300 x 1410 mm

weight

550kg

cabinet

Powder coated (stainless option available)

Electricity
power consumption
current consumption
Ingress protection level
Potential free contact
Provided by customer
electric supply
Fuse, slow blow
cable cross section, Cu
signal cable


1.8kW
4.8 A
IP54
start-stop signal

3/N/PE ~ 400V 50Hz
16A
2.5mm2
to be agreed

Water
water supply 
drain
provided by customer
pressure
quality
pH value
hardness

temperature


½” male thread
14mm

2 – 5 bar
drinking water quality
7.2 – 9.5 pH
6 – 14 °dH
100 – 250mg CaCO3/l
10°C - 20°C

Ambient air temperature

5°C - 45°C

Cooling
evaporation temperature
refrigerating capacity
connection liquid pipe
connection suction pipe

Provided by customer for the ice maker

refrigerant
liquid temperature
evaporation temperature
admissable operating pressure / high side
admissable operating pressure / low side


-24°C
16 kW
12mm
16mm

 

R744 (CO²)
-10°C -10°C; free from bubbles
 <-30°C, refrigeration system
45bar
40bar

Ice discharge

See options tab

Shipping dimensions (W x D x H)

1.0x 1.5 x 1.7m

Shipping weight

700kg

A: Control panel
C: Ice discharge
D: Electrical connection
E: Water connection
F: Water drain
K: Liquid pipe
L: Suction pipe

The UBE 3.500 EV CO² ice maker will be delivered according to EC standards and ready for connection to a refrigeration system and utilities.

Includes as standard:

  • All necessary control units for connection to refrigeration system
  • Pre-wired switch box including potential free contact
  • 3 min. overrun to use the re-evaporation after switch off
  • Phase sequence relay
  • Overload cut-out / thermal switch for all motors
  • Water level monitoring
  • Safety switch in case of ice jam
  • Ice discharge hose or tube according to requirements (see options tab)
  • Hygiene+: auto water drain to prevent nucleation
  • Switch off by reflection light scanner
  • 1 x flexible 2 metre water supply hose
  • Water drain hose 2m
  • 1 x PE ice scoop
  • 1 x Ziegra Triple water filtration kit

Choose an ice discharge to suit your application

   

Ice discharge type L

Ice discharge by flexible hose, level control by reflection sensor. Usually used in conjunction with wall brackets or support frame.

Standard option for this model, the flexible tube can be used to fill ice carts and can be pushed through a wall. In order to avoid blockage it is advisable to maintain a minimum 22° fall from horizontal.

State dimension X when ordering.

   

Ice discharge type K

Ice discharge by rigid vertical pipe, level control by light barrier in the top of the pipe. Usually used when machine is sat directly on top of an ice store.

No cost option for this model, the rigid pipe drops vertically down to discharge ice below the machine position. 

State dimension Y when ordering.

   

Ice discharge type R

Ice discharge by rigid vertical pipe, level control by light barrier in the bottom of the pipe. Usually used when machine is filling an ice cart.

No cost option for this model, the rigid pipe drops vertically down to discharge ice below the machine position. 

State dimension Y when ordering.

   

Ice discharge type S

Ice discharge by rigid vertical pipe, level control by light barrier in the bottom of the pipe. Usually used when machine is discharging ice through a wall and feeding a cart below.

No cost option for this model, the rigid pipe drops vertically down to discharge ice below the machine position. 

State dimensions X + Y when ordering.

   

Configuration Options

   

Upgrade to stainless cabinet
When the machine is to be installed in a hygienic production environment. Frame and panels can be upgraded to stainless steel.

   

Longer legs
To raise the machine to make it easier to clean underneath and to bring the ice outlet to a height suitable for discharging ice into an ice box or cart placed alongside the machine where the standard ice discharge height of 1140mm would not be high enough.

Usually paired with an L type ice discharge (see ice discharge options).

   

Frostguard
The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

   

Cold installation pack
Extra insulation and heater for installation in a coldroom below 5degC. Only available in conjuntion with remote condenser option above.

   

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing inc. drain

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilisation

sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

   

Sanitiser solution: 5litre tub part # ZUK9700044
Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridges
Set of replacement cartridges for the Ziegra triple kit, requires change every 6 months.

   

Remote operating switch: A separate operating switch for machines that are to be installed in areas that are not to easy to access such as on top of coldrooms or in roofspaces

   

Ancillary Items

   
Smartcart 240
80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid.
   

Insulated ice storage boxes
Double walled polyethylene containers with expanded foam insulated core. Made from food grade virgin USDA/FDA/EU approved polyethylene. PU filled and UV stable, strong and durable stackable design for space saving.

   
Poly ice shovel
One piece moulded ice shovel in white for the hygienic and rapid removal of ice from boxes, bunkers and bins.