For expert advice call
0844 8808055

5,000kg Industrial Flake Ice Machine

The Ziegra UBE 5.000 ice machine makes up to 5,000kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

UBE 5.000 main features:

  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Three sizes of ice flake available: micro, midi or macro
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Powder coated frame and panels (stainless optional)
  • No moving parts in refrigeration circuit lowers risk of gas leaks

 

UBE 5.000 - Standard

UBE 5.000 - Tropical

5,000kg / 24h nominal capacity*

20°C air and 15°C water

35°C air and 25°C water

Dimensions (W x D x H)

1,800 x 1,700 x 1,844 mm

Weight

1,400kg

Cabinet

Powder coated

Ice discharge

See ‘ice discharge options’

Electricity
Power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


17.5kW
34A

3/N/PE ~ 400V 50Hz
80A
16mm2


21.5kW
46A

3/N/PE ~ 400V 50Hz
80A
16mm2

Water
supply / drain
Provided by customer
pressure
quality
pH-value
hardness

temperature


¾” BSP / 14mm O/D hose

2-5 bar
drinking water
7.2 – 9.5 pH
6 – 14 °dH
100 – 250 mg CaCO3/l
5°C - 30°C

Ambient temperature

5°C to 42°C

5°C to 45°C

Condenser
airflow
heat emission

air cooled
12,500 m3 / h
40 kW

air cooled
15,000 m3 / h
41 kW

Refrigerant R452a
ODP
GWP
CO² tonnes equivalent
F-Gas leak check

12kg
0
2140
25.68
Annual

Compressor

refrigeration capacity
evaporation temperature
condensation temperature

Semi hermetic
6H Bitzer
25kW
-32°C
33°C

Semi hermetic
6G Bitzer
27kW
-31°C
45°C

Noise level

76dBA (3m)

Shipping dimensions: W x D x H

2.08 x 1.86 x 2.20m

Shipping weights

1,700kg

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

D: Electrical cable
E: Water connection: ¾ BSP
F: Overflow: 14mm
Filter: Ziegra Triple supplied as standard (not shown)

 

The UBE 5.000 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes:

  • Hygiene +: Automatic water drain
  • 3 min. overrun to use the re-evaporation after switch off.
  • Condensation control in order to maintain high ice quality
  • Phase sequence relay
  • Overload cut-out / thermal switch for all motors and compressor
  • High/low pressure control
  • Water level monitoring
  • Ice discharge hose or tube, according to requirement
  • Switch off by light scanner or light barrier when ice receptacle full.
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x PE ice scoop
  • 1 x Ziegra Triple water filtration kit

Choose an ice discharge to suit your application

   

Ice discharge type L

Ice discharge by flexible hose, level control by reflection sensor. Usually used in conjunction with wall brackets or support frame.

Standard option for this model, the flexible tube can be used to fill ice carts and can be pushed through a wall. In order to avoid blockage it is advisable to maintain a minimum 22° fall from horizontal.

State dimension X when ordering.

   

Ice discharge type K

Ice discharge by rigid vertical pipe, level control by light barrier in the top of the pipe. Usually used when machine is sat directly on top of an ice store.

No cost option for this model, the rigid pipe drops vertically down to discharge ice below the machine position. 

State dimension Y when ordering.

   

Ice discharge type R

Ice discharge by rigid vertical pipe, level control by light barrier in the bottom of the pipe. Usually used when machine is filling an ice cart.

No cost option for this model, the rigid pipe drops vertically down to discharge ice below the machine position. 

State dimension Y when ordering.

   

Ice discharge type S

Ice discharge by rigid vertical pipe, level control by light barrier in the bottom of the pipe. Usually used when machine is discharging ice through a wall and feeding a cart below.

No cost option for this model, the rigid pipe drops vertically down to discharge ice below the machine position. 

State dimensions X + Y when ordering.

   

Configuration Options

   

Upgrade to stainless cabinet
When the machine is to be installed in a hygienic production environment. Frame and panels can be upgraded to stainless steel.

   

Longer legs: To raise the machine to make it easier to clean underneath and to bring the ice outlet to a height suitable for discharging ice into an ice box or cart placed alongside the machine where the standard ice discharge height of 1140mm would not be high enough.

Usually paired with an L type ice discharge (see ice discharge options).

   

Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea.

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.

   

Frostguard
The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

   

Cold installation pack
Extra insulation and heater for installation in a coldroom below 5degC. Only available in conjuntion with remote condenser option above.

   

Ice maker only: For installation with a customer’s own refrigeration unit or central refrigeration system

   

Stacked configuration
Refrigeration and controls below ice maker to make a taller unit. Useful when a reduced footprint or higher ice discharge is required.

Often used when the machine is to be part of an automatic system with the AS500 mini ice silo or SIB-F Freshwater StreamIce® tank

   

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing inc. drain

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilization

sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

   

Sanitiser solution: 5litre tub part # ZUK9700044
Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridges
Set of replacement cartridges for the Ziegra triple kit, requires change every 6 months.

   

Remote operating switch: A separate operating switch for machines that are to be installed in areas that are not to easy to access such as on top of coldrooms or in roofspaces

   

Ancillary Items

   
Smartcart 240
80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid.
   

Insulated ice storage boxes
Double walled polyethylene containers with expanded foam insulated core. Made from food grade virgin USDA/FDA/EU approved polyethylene. PU filled and UV stable, strong and durable stackable design for space saving.

   
GRP plantroom
A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.
   
Poly ice shovel
One piece moulded ice shovel in white for the hygienic and rapid removal of ice from boxes, bunkers and bins.