For expert advice call
0844 8808055

1,200kg flake ice machine with 630kg elevated bin and cart

The Ziegra ZBE 1.200-BK630 makes up to 1,200kg of flaked ice into a 630kg elevated bin ready for use.  A customers own carts up to 666mm wide can be docked under the bin and filled by gravity by pulling a lever just above the cart, thus eliminating shovelling of ice from the bin. Ideal for the popular Eurobins found in many bakeries and meat processing factories.

ZBE 1.200 main features

  • Automatic operation: Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Three sizes of ice flake available: micro, midi or macro.
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks

BK630 WB main features

  • First ice in, first ice out bin design reduces risk of stale ice
  • Docking for customers own carts up to 666mm wide
  • Gravity unloading of bin, reduces manual handling of the ice
  • Durable polyethylene lift door with no sharp corners
  • Powerhinge makes door easy to open and close one handed
  • Poly lined bin interior for easy cleaning and chlorine resistance
  • Non CFC insulation in bin


ZBE 1.200-BK630 WB

ZBE 1.200-BK630 WB 

1200kg / 24h nominal capacity*

at 20°C air and 15°C water

at 35°C air and 25°C water

Storage capacity 630kg (2.01m3)

Dimensions (W x D x H)

1525 x 1237 x 4362mm





stainless steel 1.430

Ice discharge

K type

Power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


3/N/PE ~ 400V 50Hz


3/N/PE ~ 400V 50Hz

supply / drain

Provided by customer

3/4” BSP / 14mm O/D hose

2-5 bar
drinking water
7.2 – 9.5 pH
6 – 14 °dH  100 – 250 mg CaCO3/l
5°C - 30°C

Ambient temperature

5°C to 42°C

5°C to 45°C

heat emission

air cooled
2,900 m3 / h
7.5 kW

air cooled
3,000 m3 / h
10.3 kW

Refrigerant R452a
CO² tonnes equivalent
F-Gas leak check


refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic

Fully hermetic

Noise level

60dBA (3m)

Shipping dimensions: W x D x H

(0.89 x 0.82 x 1.19m) + (1.64 x 1.32 x 1.22m) + (1.64 x 1.32 x 1.22m)

Shipping weights: Kg

(200) + (240) + (180)

(205) + (240) + (180)

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

All product, product specifications and data are subject to change without notice

A: Ice machine
B: Ice storage
C: Electrical cable
D: Water connection: ¾ BSP
E: Overflow: 14mm
F: Floor drain (by customer)

The ZBE 1.200-BK630 WB ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

  • Condensation control
  • Phase sequence relay
  • Overload cut-out / thermal switch for all motors and compressor
  • High pressure pressostat
  • Water level monitoring
  • K type ice discharge
  • Level control by light scanner / barrier when bin is full
  • Flexible hose water for water supply 2m
  • Water drain hose 2m
  • PE ice scoop
  • Ziegra triple external 3 stage water filtration unit

Configuration options


Drain Pump

Pumps the drain water into the site drain if it is too high or far away for gravity drainage. Supplied with a 2 metre flex, it can be directly wired into a fused spur or a plug fitted (not supplied) and plugged into a standard 3 pin socket. Mount on the floor underneath the machine. Not suitable for dusty environments.


Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea.

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.

Frostguard: The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.


CoolNat Ice maker only 

For connection to a central CO2 refrigeration system


Additional Hygiene Options


Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.


Hygiene +: Automatic flushing inc. drain

Auto flushing of system with water, includes auto water drain. Details on request.


Hygiene +: UV sterilization

sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.


Sanitiser solution: 5litre tub part # ZUK9700044
Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.


Spare filter cartridges: Set of replacement cartridges for the Ziegra triple kit that comes as standard with this machine, The fine and coarse cartridges require change every 6 months, the anti-scale when it runs low. Order part ZUK9700031KIT.

Set consists of :

1 x ZUK9700033 - Coarse filter

1 x ZUK9700032 - Anti-scale filter

1 x ZUK9700031 - Fine filter.


Ancillary Items


BR 80 Insulated ice cart

Insulated ice carts for the BK630 WB bin for customers who want dedicated ice carts and don't want to use their existing carts for ice.

GRP plantroom: A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.