For expert advice call
0844 8808055

500kg Nugget Ice Machine - No Storage

The Ziegra ZNE 500 ice machine makes up to 500kg per 24 hours of nugget ice. The machine is easy to install requiring only positioning and connection to utilities. The standard machine is pre-commissioned in the factory and shipped ready to run.

ZNE 500 main features

  • Ice level control system included as standard
  • Nugget ice made at optimum temperature of -0.5°C.
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks

The machine can be mounted on wall brackets, support frame or sat on your own storage/cold-room, with a number of ice discharge options to suit your application.

 

Model

ZNE 500

500kg / 24h nominal capacity*

at 20°C air and 15°C water

Dimensions (W x D x H)

700 x 700 x 850 mm

weight

140kg

cabinet

Stainless steel 1.4301

Electricity
power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


2.0kW
4.7A

3/N/PE ~ 400V 50Hz
20A
2.5mm2

Water
supply / drain
provided by customer
pressure
quality
pH value
hardness

temperature


¾” BSP / 14mm

2 – 5 bar
drinking water quality
7.2 – 9.5 pH
6 – 14 °dH
100 – 250mg CaCO3/l
5°C - 30°C

Ambient air temperature

5°C - 42°C

Condenser
air flow
heat emission

Air cooled
2500 m3/h
4.3kW

Refrigerant type
Refrigerant charge
ODP
GWP
CO2 Tonnes equivalent
R452A
1.8kg
0
2,150
3.87

Compressor
refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic
2.3kW
-20°C
35°C

Noise level

60dBA (3m)

Shipping dimensions (W x D x H)

 

Shipping weight

 

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

All product, product specifications and data are subject to change without notice

A: Ice machine
B: Ice discharge
C: Water connection 3/4" BSP
D: Electrical connection 400V-3ph-50Hz
E: Overflow: 14mm

The ZNE 500 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

  • Condensation control
  • Phase sequence relay
  • Motor protection for the compressor
  • Overload cut-out / thermal switch for all motors and compressor
  • High pressure pressostat
  • Water level monitoring
  • Ice discharge tube
  • Level control by reflection light scanner
  • Connecting cable 5m
  • Flexible hose water for water supply 2m
  • Water drain hose 2m
  • PE ice scoop
  • Ziegra triple external 3 stage water filtration unit

Choose an ice discharge to suit your application

   

Mounting Options

   

Wall mounting brackets

A pair of stainless mounting brackets to mount either the ice machine or a remote condenser on a wall. Allows the machine to be mounted at a convenient height for filling ice carts/bins.

Stainless steel, manually ground.

   

Stainless support frame

A frame to raise the ice machine to a more convenient working height, useful when the machine is to be floor standing. 90cm and 110cm with drain available.

Stainless steel, glass beaded.

The picture shows the 110cm model with ice cart, not included. 

Casing for ice discharge:

A stainless casing for the ice discharge to hide the ice pipe. Recommended when the machine is to go into food production areas

   

Configuration Options

   

Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea.

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.

   

Frostguard: The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

   

Cold installation pack: Extra insulation, heated cable and heater for installation in a coldroom below 5degC. Only available in conjuntion with remote condenser option above.

   

Ice maker only: For installation with a customer’s own refrigeration unit or central refrigeration system

   

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing inc. drain

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilization

Sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

   

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridges

Set of replacement cartridges for the Ziegra triple kit, requires change every 6 months.

   

Ancillary Items

   

Smartcart 240

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid.

   

Insulated ice storage boxes

Double walled polyethylene containers with expanded foam insulated core. Made from food grade virgin USDA/FDA/EU approved polyethylene. PU filled and UV stable, strong and durable stackable design for space saving.

   

7 day timer

Allows programming of the machine to make ice at specific times of the day or night.

   

Remote operating switch

A separate operating switch for machines that are to be installed in areas that are not to easy to access such as on top of coldrooms or in roofspaces

   

GRP plantroom

A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.

   

Poly ice shovel

One piece moulded ice shovel in white for the hygienic and rapid removal of ice from boxes, bunkers and bins.