For expert advice call
0844 8808055

350kg flake ice maker

The Ziegra ZBE 350 EV CO² ice maker is designed to be connected to an existing central CO² refrigeration system. The machine is easy to install requiring only positioning and connection to utilities. It can make a maximum of 350kg granular flake ice per day in one of two sizes.

ZBE 350 EV CO² main features

  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available: micro and midi, to suit a wide range of applications
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard
  • Designed for connection to sub-critical part of a CO² refrigeration system
  • Stainless steel construction

The machine can be mounted on wall brackets, support frame or sat on your own storage/cold-room, with a number of ice discharge options to suit your application.

 

Model

ZBE 350 EV CO²

350kg / 24h nominal capacity at

15°C water temperature

Dimensions (W x D x H)

600 x 700 x 600 mm

weight

45kg

cabinet

Stainless steel 1.4301

Electricity
power consumption
current consumption
Potential free contact
Provided by customer
electric supply
cable cross section, Cu
signal cable


0.28kW
1.4A
start-stop signal
1/N/PE ~ 230V 50Hz
6A
1.5mm2
to be agreed

Water
supply / drain
provided by customer
pressure
quality
pH value
hardness

temperature


¾” BSP / 14mm

2 – 5 bar
drinking water quality
7.2 – 9.5 pH
6 – 14 °dH
100 – 250mg CaCO3/l
5°C - 30°C

Ambient air temperature

5°C - 45°C

Cooling
evaporator
evaporation temperature
refrigerating capacity
connection liquid pipe
connection suction pipe

Provided by customer for the ice maker

refrigerant
refrigerant temperature
evaporation temperature
admissable operating pressure / high side
admissable operating pressure / low side


ZBE350
-13°C
1.75 kW
10mm
10mm

 

R744 (CO²)
to be agreed
refrigeration system < -30°C direct evaporation
45bar
40bar

Ice discharge

See ‘ice discharge options’

Shipping dimensions (W x D x H)

0.76 x 0.66 x 0.79m

Shipping weight

60kg

D: Electrical connection
E: Water supply
F: Water drain
K: Liquid pipe
L: Suction pipe

The ZBE 350 EV CO² ice maker will be delivered according to CE standards and ready for connection to a refrigeration system and utilities.

Includes as standard:

  • All necessary control units for connection to refrigeration system
  • Pre-wired switch box including potential free contact
  • 3 min. overrun to use the re-evaporation after switch off
  • Overload cut-out / thermal switch for all motors
  • Water level monitoring
  • Ice discharge hose according to requirements
  • Switch off by reflection light scanner
  • 1 x flexible 2 metre water supply hose
  • Water drain hose 2m
  • 1 x PE ice scoop
  • 1 x Ziegra Single water filtration kit

Choose an ice discharge to suit your application

   

Ice discharge type A:

This is the standard no cost option for our small machines. OK in ambient environments that never drop below 5°C. A 60mm tube feeds ice from the back of the machine and senses the level of the ice by temperature probe.

   

Ice discharge type B:

Especially suited when machine is directly sat on top of an ice storage bin.

Ice discharges through bottom of machine via rigid 110mm Ø pipe. An ice jam switch in the top of the tube stops the machine when the bin is full.

   

Ice discharge type L:

When a flexible hose is needed but the ice hose will be fed through a wall into a refrigerated atmosphere.

Ice discharges through the back of machine via a 60mm Ø flexible hose. A reflection sensor located at the end of the hose will stop the machine when the receptacle is full.

   

Ice discharge type D:

Ice discharges through the bottom of the machine via 54mm Ø flexible hose, 75mm Ø insulated. Level control via light barrier built into the hose.

A reflection sensor and / or 88.9mm Ø x 600mm stainless long end tube can be added as additional options. Designed for sauna applications when discharging through a wall into an adjacent room with ice receptacle.

   

Ice discharge type F:

Ice discharges through the bottom of the machine via via 54mm Ø flexible hose, 75mm Ø insulated. Level control by externally mounted reflection sensor.

An 88.9mm Ø x 600mm stainless long end tube can be added as additional option. Designed for sauna applications when discharging through a ceiling into a room below with ice receptacle.

   

Ice discharge type G:

Ice discharges through the back of the machine via 54mm Ø flexible hose, 75mm Ø. Level control via externally mounted reflection sensor.

An 88.9mm Ø x 600mm stainless long end tube can be added as additional option. Designed for sauna applications when discharging through a ceiling into a room below when the machine cannot be placed directly above the ice receptacle.

 

Mounting options

   

Wall mounting brackets

A pair of stainless mounting brackets to mount either the ice machine or a remote condenser on a wall. Allows the machine to be mounted at a convenient height for filling ice carts/bins below or discharge through a wall into another room depending on the ice discharge option chosen above.

   

Stainless support frame

A frame to raise the ice machine to a more convenient working height, useful when the machine is to be floor standing. 90cm and 110cm with drain available. The machine can discharge into bins below or discharge through a wall, depending on the ice discharge option chosen above.

The picture shows the optional B type ice discharge and ice cart, not included.

   

Ice storage bin

A range of insulated bins in various capacities and designs.

 

Configuration options

   

 

 

   

Frostguard

The machine equipped with a small heater to deal with intermittent temperatures below 5ºC

   

Frostguard, insulation, heating cable

When machine is to be installed in a cold storage room.

 

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilization

sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.
 

   

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

 

Ancillary items

   

7 day timer

Allows programming of the machine to make ice at specific times of the day or night.

   

Remote operating switch

A separate operating switch for machines that are to be installed in areas that are not to easy to access such as on top of coldrooms or in roofspaces

   

Smartcart 240: 

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.