For expert advice call
0844 8808055

1,000kg Nugget ice machine - no storage

The Ziegra ZNE 1.000 ice machine makes up to 1,000kg per 24 hours of nugget ice. It is available in both standard UK and tropical versions.

ZNE 1.000 main features

  • Ice level control system included as standard
  • Nugget ice made at optimum temperature of -0.5°C.
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel frame and panels as standard
  • No moving parts in refrigeration circuit lowers risk of gas leaks


ZNE 1.000 - Standard

ZNE 1.000 - Tropical

1,000kg / 24h nominal capacity*

at 20°C air and 15°C water

at 35°C air and 25°C water

Dimensions (W x D x H)

800 x 800 x 950mm





stainless steel 1.4301

Power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


3/N/PE ~ 400V 50Hz


3/N/PE ~ 400V 50Hz

supply / drain
Provided by customer

3/4” BSP / 14mm O/D hose

2-5 bar
drinking water
7.2 – 9.5 pH,
6 – 14 °dH, 100 – 250 mg CaCO3/l
5°C - 30°C

Ambient temperature

5°C to 42°C

5°C to 45°C

heat emission

air cooled
2,900 m3 / h
7.5 kW

air cooled
3,000 m3 / h
10.3 kW

Refrigerant type
Refrigerant charge
CO2 Tonnes equivalent




refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic


Fully hermetic


Noise level

60dBA (3m)

60dBA (3m)

Shipping dimensions:

W x D x H


(0.89 x 0.82 x 1.19m)

Shipping weights



*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

All product, product specifications and data are subject to change without notice

A: Ice machine
B: Ice discharge
C: Water connection 3/4" BSP
D: Electrical connection
E: Overflow: 14mm

The ZNE 1.000 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

  • Condensation control
  • Phase sequence relay
  • Motor protection for the compressor
  • Overload cut-out / thermal switch for all motors and compressor
  • High pressure pressostat
  • Water level monitoring
  • Ice discharge tube
  • Level control by thermostat
  • Flexible hose water for water supply 2m
  • Water drain hose 2m
  • PE ice scoop
  • Ziegra triple external 3 stage water filtration unit

Choose an ice discharge to suit your application


Mounting Options


Wall mounting brackets

A pair of stainless mounting brackets to mount either the ice machine or a remote condenser on a wall. Allows the machine to be mounted at a convenient height for filling ice carts/bins.

Stainless steel, manually ground.


Stainless support frame

A frame to raise the ice machine to a more convenient working height, useful when the machine is to be floor standing. 90cm and 110cm with drain available.

Stainless steel, glass beaded.

The picture shows the 110cm model with ice cart, not included. 

Casing for ice discharge:

A stainless casing for the ice discharge to hide the ice pipe. Recommended when the machine is to go into food production areas


Configuration Options


Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea.

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.


Frostguard: The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.


Cold installation pack: Extra insulation, heated cable and heater for installation in a coldroom below 5degC. Only available in conjuntion with remote condenser option above.


Ice maker only: For installation with a customer’s own refrigeration unit or central refrigeration system


Additional Hygiene Options


Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.


Hygiene +: Automatic flushing inc. drain

Auto flushing of system with water, includes auto water drain. Details on request.


Hygiene +: UV sterilization

Sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.


Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.


Spare filter cartridges

Set of replacement cartridges for the Ziegra triple kit, requires change every 6 months.


Ancillary Items


Smartcart 240

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid.


Smartcart 125

57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With built in hinged lid.


Insulated ice storage boxes

Double walled polyethylene containers with expanded foam insulated core. Made from food grade virgin USDA/FDA/EU approved polyethylene. PU filled and UV stable, strong and durable stackable design for space saving.


7 day timer

Allows programming of the machine to make ice at specific times of the day or night.


Remote operating switch

A separate operating switch for machines that are to be installed in areas that are not to easy to access such as on top of coldrooms or in roofspaces


GRP plantroom

A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.


Poly ice shovel

One piece moulded ice shovel in white for the hygienic and rapid removal of ice from boxes, bunkers and bins.