For expert advice call
0844 8808055

1,000kg Nugget Ice Machine with 500kg Smartgate Ice Bin

The Ziegra ZNE1.000-SG500 ice machine makes up to 1,000kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

ZNE1.000 main features

  • Ice level control system included as standard
  • Nugget ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available.
  • Hygienic design with a sealed water system 
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks

SG500 ice storage features

  • First ice in, first ice out design
  • Positive control of ice flow into access door area for easy removal by scoop or shovel
  • Durable polyethylene lift door with no sharp corners
  • Powerhinge makes door easy to open and close with one hand
  • Door stays safely open with no catches needed
  • Stainless steel construction
  • Non CFC insulation
  • Non corroding interior poly liners for easy cleaning and maximum chlorine resistance

 

Model

ZNE1.000-SG500 Standard

ZNE1.000-SG500 tropical

1,000kg / 24h nominal capacity*

at 20°C air and 15°C water

at 35°C air and 25°C water

Ice storage capacity 500kg (1.5m³)

Dimensions (W x D x H)

1525 x 1007 x 2638mm

Weight

352kg

Cabinet

stainless steel 1.4301

Electricity
Power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


3.3kW
7.5A

3/N/PE ~ 400V 50Hz
25A
2.5mm2


4.3kW
8.5A

3/N/PE ~ 400V 50Hz
25A
2.5mm2

Water
supply / drain
Provided by customer
pressure
quality
pH-value
hardness

temperature


3/4” BSP / 14mm O/D hose
2-5 bar
drinking water
7.2 – 9.5 pH
6 – 14 °dH
100 – 250 mg CaCO3/l
5°C - 30°C


3/4” BSP / 14mm O/D hose
2-5 bar
drinking water
7.2 – 9.5 pH
6 – 14 ° dH
100 – 250 mg CaCO3/l
5°C - 30°C

Ambient temperature

5°C to 42°C

5°C to 45°C

Condenser
airflow
heat emission

air cooled
2,900 m3 / h
7.5 kW

air cooled
3,000 m3 / h
10.3 kW

Refrigerant R452a

2.2kg

2.8kg

Compressor

refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic

5.0kW
-22°C
33°C

Fully hermetic

5.6kW
-21°C
45°C

Noise level

60dBA (3m)

Shipping dimensions:

W x D x H

 

(0.89 x 0.82 x 1.19m) + (1.08 x 1.65 x 1.64m)

Shipping weights

(205kg) + (157kg)

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

D: Electrical cable / plug: Standard UK 3 pin
E: Water connection: ¾ BSP
F: Overflow: 14mm
Filter: Ziegra Triple supplied as standard (not shown)

The ZNE1.000-SG500 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

  • Condensation control
  • Phase sequence relay
  • Motor protection for the compressor
  • Overload cut-out / thermal switch for all motors and compressor
  • High pressure pressostat
  • Water level monitoring
  • Ice discharge tube
  • Level control by reflection light scanner
  • Connecting cable 5m
  • Flexible hose water for water supply 2m
  • Water drain hose 2m
  • PE ice scoop
  • Ziegra triple external 3 stage water filtration unit

Configuration Options

   

Castor mounting

The bin mounted on castors so the machine can be moved for cleaning. Comes pre-fitted to the bin.

   

Drain Pump

Pumps the drain water into the site drain if it is too high or far away for gravity drainage. Supplied with a 2 metre flex, it can be directly wired into a fused spur or a plug fitted (not supplied) and plugged into a standard 3 pin socket. Mount on the floor underneath the machine. Not suitable for dusty environments.

   

Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea.

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.

   

Frostguard

The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

   

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing inc. drain

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilization

Sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

   

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridges: Set of replacement cartridges for the Ziegra triple kit that comes as standard with this machine, The fine and coarse cartridges require change every 6 months, the anti-scale when it runs low. Order part ZUK9700031KIT.

Set consists of :

1 x ZUK9700033 - Coarse filter

1 x ZUK9700032 - Anti-scale filter

1 x ZUK9700031 - Fine filter.

   

Ancillary Items

   

Smartcart 240

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.

   

7 day timer

Allows programming of the machine to make ice at specific times of the day or night.

   

GRP plantroom

A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.