For expert advice call
0844 8808055

300kg Nugget Ice Machine - No Storage

The Ziegra ZNE 300 ice machine makes up to 300kg per 24 hours of nugget ice. The machine is easy to install requiring only positioning and connection to utilities. The standard machine is pre-commissioned in the factory and shipped ready to run.

ZNE 300 main features

  • Ice level control system included as standard
  • Nugget ice made at optimum temperature of -0.5°C.
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks

The machine can be mounted on wall brackets, support frame or sat on your own storage/cold-room, with a number of ice discharge options to suit your application.



ZNE 300 - Standard

ZNE 300 - Tropical

300kg / 24h nominal capacity*

at 20°C air / 15°C water

at 35°C air / 25°C water

Dimensions (W x D x H)

700 x 700 x 600mm




stainless steel 1.4301

Power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu

4.9 / 2.8A

1/N/PE ~ 230V 50Hz

7.5 / 3.8A

1/N/PE ~ 230V 50Hz

supply drain

Provided by customer

3/4” BSP /14mm O/D hose

2-5 bar
drinking water
7.2 – 9.5 pH
6 – 14 °dH 100 – 250 mg CaCO3/l
5°C - 30°C

Ambient temperature

5°C to 42°C

5°C to 45°C

heat emission

air cooled
1,400 m3 / h
1.6 kW

air cooled
1,400 m3 / h
2.6 kW

Refrigerant type
Refrigerant charge
CO2 Tonnes equivalent


refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic

Fully hermetic

Noise level

55dBA (3m)

Shipping dimensions: W x D x H

0.76 x 0.66 x 0.79m

Shipping weights


*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

All product, product specifications and data are subject to change without notice

A: Ice machine
B: Ice discharge pipe: ø110mm
C: Water supply: 3/4"BSP
D: Electrical connection: 2m flex with standard UK 3 pin plug
E: Water drain:14mm

The ZNE 300 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

  • High pressure pressostat
  • Water supply control
  • Motor protection for the compressor
  • 1 x Ice discharge tube
  • Ice level control by reflection light scanner
  • 1 x connecting cable 3.5m
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x PE ice scoop
  • 1 x Ziegra Single water filtration kit

Choose an ice discharge to suit your application


Mounting options


Wall mounting brackets

A pair of stainless mounting brackets to mount either the ice machine or a remote condenser on a wall. Allows the machine to be mounted at a convenient height for filling ice carts/bins below or discharge through a wall into another room depending on the ice discharge option chosen above.


Stainless support frame

A frame to raise the ice machine to a more convenient working height, useful when the machine is to be floor standing. 90cm and 110cm with drain available. The machine can discharge into bins below or discharge through a wall, depending on the ice discharge option chosen above.

The picture shows the optional B type ice discharge and ice cart, not included.


Configuration options


Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea.

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.



The machine equipped with a small heater to deal with intermittent temperatures below 5ºC, only available in conjuction with remote condenser option above.


Frostguard, insulation, heating cable

When machine is to be installed in a cold storage room. Available only in conjuction with remote condenser option above.


Additional Hygiene options


Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.


Hygiene +: Automatic flushing

Auto flushing of system with water, includes auto water drain. Details on request.


Hygiene +: UV sterilization

Sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.


Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.


Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.


Ancillary items


7 day timer

Allows programming of the machine to make ice at specific times of the day or night.


Remote operating switch

A separate operating switch for machines that are to be installed in areas that are not to easy to access such as on top of coldrooms or in roofspaces


Smartcart 240: 

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.