For expert advice call
0844 8808055

3,000kg Trawler Flake Ice Machine - Twin circuit

The Ziegra SWE 3.000-2TW makes 3,000kg per 24 hours of fresh water flake ice or 2,400kg per 24hrs of salt water ice. It is available in both standard UK and tropical versions.

SWE 3.000-2TW main features

  • twin independant refrigeration and controls for maximum fall over protection
  • Ice level control system included as standard
  • Ice from saltwater or freshwater.
  • Hygienic design with a sealed water system
  • All connections in one easy access manifold
  • Designed for continuous operation 24/7
  • Stainless steel frame and panels, as standard
  • No moving parts in refrigeration circuit lowers risk of gas leaks

Model

SWE 3.000-2TW

  Freshwater (kg/24hr) Seawater (kg/24hr)

 Nominal capacity*

3,000

2,400

Dimensions (W x D x H)

1,310 x 1,310 x 1410 mm

weight

800kg

cabinet

Stainless steel 1.4301

Electricity
power consumption
current consumption
electric supply
fuse, slow-blow
cable cross section, Cu


12.4kW
28A
400-3-50Hz
50A - Slow
6mm2

Water Connections
supply / drain

Cooling water inlet

Cooling water outlet

Overflow

pressure

temperature


1/2” BSP 

1" BSP

1" BSP

14mm

2 – 5 bar

5°C - 30°C

Condenser
Cooling Water

Seawater cooled
1450 litres/hr

Refrigerant 

R452A

Ice discharge

See ‘ice discharge options’

Shipping dimensions (W x D x H)

1,100 x 1,300 x 1,700mm

Shipping weight

900kg

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

A: Ice machine
B: Ice discharge. 90mm Ø
C: Water inlet. G 1/2" 
D: Electrical connection
E: Drain . G 1/2"
O: Cooling water inlet: G 3/4" 
P: Cooling water outlet: G 1"

The SWE 3.000-2 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes:

  • Hygiene +: Automatic water drain
  • 3 min. overrun to use the re-evaporation after switch off.
  • Condensation control in order to maintain high ice quality
  • Phase sequence relay
  • Overload cut-out / thermal switch for all motors and compressor
  • High/low pressure control
  • Water level monitoring
  • Ice discharge hose or tube, according to requirement
  • Switch off by light scanner or light barrier when ice receptacle full.
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x PE ice scoop
  • Ziegra Trawler Triple water filtration system

Ice discharge type L: Ice discharge by flexible hose, level control by reflection sensor.

Standard option for all SWE models, the flexible tube can be routed into other compartments. In order to avoid blockage it is advisable to maintain a fall over between 35 and 45deg from horizontal. Suitable for freshwater and saltwater ice.

State dimension X when ordering.

                   

Ice discharge type K: Ice discharge by rigid pipe, level control by light barrier. 

Optional for all SWE models, the rigid pipe drops vertically down to discharge ice below the machine position. Suitable for freshwater only.

State dimension Y when ordering.

         

Frostguard: The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

Cold installation pack: Extra insulation and heater for installation in a coldroom below 5degC. Only available in conjuntion with remote condenser option above.

Ice maker only: For installation with a customer’s own refrigeration unit or central refrigeration system

Painted pipework: Refrigeration pipework painted, required when machine will be located in areas exposed to ammonia in the atmosphere.

 

Sanitiser solution: 5litre tub part # ZUK9700044
Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

Poly ice shovel: One piece moulded ice shovel in white for the hygienic and rapid removal of ice from boxes, bunkers and bins.