For expert advice call
0844 8808055

125kg Nugget Ice Machine with Frame and Cart

The Ziegra ZNE 125-K45 ice machine makes up to 125kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

ZNE 125 main features

  • Ice level control system included as standard
  • Nugget ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available.
  • Hygienic design with a sealed water system
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks

K45 main features

  • First ice in, first ice out design
  • 1 x Smartcart included with bin, spare carts available if necessary
  • Once piece Roto-moulded construction of cart for easy cleaning.
  • BR 80 ice cart includes built in drain valve and lid
  • Small ice buffer tray keeps machine running while cart is being swapped
  • Cart drainage docking system integrated in to the bin support frame
  • Stainless steel construction 

Model

ZNE 125-K45

125kg / 24h nominal capacity*

at 20°C air and 15°C water

Ice storage capacity

80kg ice cart

Assembled dimensions (W x D x H)

787 x 1030 x 1788 mm

Assembled weight (empty)

190kg

cabinet

Stainless steel 1.4301

Electricity
power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


0.7kW
4.6A

1/N/PE ~ 230V 50Hz
13A
1.5mm2

Water
supply / drain
provided by customer
pressure
quality
pH value
hardness

temperature


¾” BSP / 18mm O/D hose (floor drain recommended)

2 – 5 bar
drinking water quality
7.2 – 9.5 pH
6 – 14 °dH
100 – 250mg CaCO3/l
5°C - 30°C

Ambient air temperature

5°C - 42°C

Condenser
air flow
heat emission

Air cooled
830 m3/h
1.3kW

Refrigerant R290
ODP
GWP

0.112kg
0
3

Compressor
refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic
0.6kW
-12°C
33°C

Noise level

50dBA (3m)

Ice discharge

B type

Shipping dimensions (W x D x H)

(1.32 x 0.91 x 1.3m) + (0.76 x 0.66 x 0.79m)

Shipping weight

(110kg) + (95kg)

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

D: Electrical cable / plug: Standard UK 3 pin
E: Water connection: ¾ BSP
F: Overflow: 14mm
Filter: Ziegra Single supplied as standard

The ZNE 125-K45 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

  • High pressure pressostat
  • Water supply control
  • Motor protection for the compressor
  • 1 x ice discharge tube
  • Ice level control by reflection sensor
  • 1 x connecting cable 3.5m
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x PE ice scoop
  • 1 x Ziegra Single water filtration kit
  • 1 x BR 80 insulated ice cart
  • 1 x ice paddle

Configuration Options

   

Drain Pump

Pumps the drain water into the site drain if it is too high or far away for gravity drainage. Supplied with a 2 metre flex, it can be directly wired into a fused spur or a plug fitted (not supplied) and plugged into a standard 3 pin socket. Mount on the floor underneath the machine. Not suitable for dusty environments.

   

Condenser options

Water cooled instead of air-cooled:  where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible.

Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated, are colder than 5ºC in winter or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea. (Requires change to R452a)

Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.

   

Frostguard

The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

 

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilization

sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

 

Ancillary Items

   

7 day timer

Allows programming of the machine to make ice at specific times of the day or night.

   

Additional BR 80 insulated ice cart

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Gives one bin to fill while another is being used.

   

GRP plantroom

A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.