For expert advice call
0844 8808055

cart docking station

The cart docking station consists of a frame to support and ice machine over a 100kg insulated ice cart. Once the cart is full a lever is pulled to seal off the ice machine so the cart can be removed without ice spilling on the floor. A buffer tray sits between the ice machine and frame and allows the machine to remain running for a short while while the cart is being used or swapped.

K45 features

  • 80kg ice cart makes transporting ice easy
  • Gravity filling of cart eliminates shovelling of ice
  • Cart drainage system built into frame legs
  • Stainless steel constrution
  • Non CFC insulation and poly lined for easy cleaning
  • Stainless steel construction 

K45 benefits

  • Efficient insulation ensures good storage of flake and nugget ice
  • Easy cleaning for good hygiene
  • Less handling of ice for reduced labour and better hygiene
  • Easy transport of ice from machine to point of use


stainless steel

Internal finish:

Polyethylene lined

Ice storage capacity:


Insulation material:

Non cfc polyurethane foam


14mm ᴓ

Weight (empty):


Shipping dimensions:

1 piece: (1320 x 910 x 1300mm high)

Shipping weight:


For ice machines:

ZBE/ZNE models, capacities from 150kg to 1,200kg / 24h

F: Drain 14mm

1 x support frame and buffer tray (supplied assembled)
1 x flexible 2 metre drain hose
1 x BR 80 insulation ice cart
Tray top pre-prepared for mounting selected model of ice machine

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.


Additional BR 80 insulated ice cart

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.


Drain Pump

Pumps the drain water into the site drain if it is too high or far away for gravity drainage. Supplied with a 2 metre flex, it can be directly wired into a fused spur or a plug fitted (not supplied) and plugged into a standard 3 pin socket. Mount on the floor underneath the machine. Not suitable for dusty environments.