For expert advice call
0844 8808055

70kg flake ice machine - no storage

The ZBE 70 is a modular packaged ice machine designed to sit on an existing ice store. It is a complete packaged ice machine including, ice maker, refrigeration and condenser in one unit.

Main Features

  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available: micro and midi, to suit a wide range of applications.
  • Hygienic design with a sealed water system 
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks
  • Environmentally friendly natural refrigerant

Model

ZBE 70

70kg / 24h nominal capacity*

at 20°C air and 15°C water

Dimensions (W x D x H)

700 x 600 x 610 mm

weight

70kg

cabinet

Stainless steel 1.4301

Electricity
power consumption
current consumption
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu


0.3kW
1.7A

1/N/PE ~ 230V 50Hz
16A
1.5mm2

Water
supply / drain
provided by customer
pressure
quality
pH value
hardness

temperature


¾” BSP / 14mm

2 – 5 bar
drinking water quality
7.2 – 9.5 pH
6 – 14 °dH
100 – 250mg CaCO3/l
5°C - 30°C

Ambient air temperature

5°C - 42°C

Condenser
air flow
heat emission

Air cooled
230 m3/h
0.4kW

Refrigerant R290:

ODP

GWP

0.086kg

0

3

Compressor
refrigeration capacity
evaporation temperature
condensation temperature

Fully hermetic
0.32kW
-10°C
30°C

Noise level

45dBA (3m)

Ice discharge

See ‘ice discharge options’

Shipping dimensions (W x D x H)

0.76 x 0.66 x 0.79m

Shipping weight

85kg

*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.

Connections located at rear of machine

D: Electrical cable / plug: Standard UK 3 pin
E: Water connection: ¾ BSP
F: Overflow: 14mm
G: Filter: Ziegra Single supplied as standard (Not shown)

 

 

 

 

 

 

 

 

A: on/off switch
C: ice discharge pipe (A type shown)
 

The ZBE 70 ice machine will be delivered according to CE standards and ready for connection to water power and drain.
Includes:

  • High pressure pressostat
  • Water supply control
  • Motor protection for compressor
  • Flexible ice discharge hose
  • Ice level control by thermostat
  • 1 x Electrical flex 3.5 metre
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose1 x PE ice scoop
  • 1 x Ziegra Single water filtration kit

 

Choose an ice discharge to suit your application

   

Ice discharge type A

This is the standard no cost option for our small machines. OK in ambient environments that never drop below 5°C. A 60mm tube feeds ice from the back of the machine and senses the level of the ice by temperature probe.

   

Ice discharge type B

Especially suited when machine is directly sat on top of an ice storage bin.

Ice discharges through bottom of machine via rigid 110mm Ø pipe. An ice jam switch in the top of the tube stops the machine when the bin is full.

   

Ice discharge type L

When a flexible hose is needed but the ice hose will be fed through a wall into a refrigerated atmosphere.

Ice discharges through the back of machine via a 60mm Ø flexible hose. A reflection sensor located at the end of the hose will stop the machine when the receptacle is full.

   

Ice discharge type D

Ice discharges through the bottom of the machine via 54mm Ø flexible hose, 75mm Ø insulated. Level control via light barrier built into the hose.

A reflection sensor and / or stainless end tube 88.9mm Ø x 600mm can be added as additional options. Designed for sauna applications when discharging through a wall into an adjacent room with ice receptacle.

 

   

Ice discharge type F

Ice discharges through the bottom of the machine via 54mm Ø flexible hose, 75mm Ø insulated. Level control via externally mounted reflection sensor.

An 88.9mm Ø x 600mm stainless steel end tube can be added as additional option. Designed for sauna applications when discharging through a ceiling into a room below with ice receptacle.

   

Ice discharge type G

Ice discharges through the back of the machine via 54mm Ø flexible hose, 75mm Ø insulated. Level control via externally mounted reflection sensor.

An 88.9mm Ø x 600mm stainless steel end tube can be added as additional option. Designed for sauna applications when discharging through a ceiling into a room below when the machine cannot be placed directly above the ice receptacle.

 

Configuration Options

   

Water cooled condenser

where air-cooling is not possible
Consumption cooling water: 50 litre per hour

E: water supply (ice production)
F: water discharge (eg auto water drain)
O: cooling water in
P: cooling water return or drainage, resp.

 

Additional Hygiene Options

   

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

   

Hygiene +: Automatic flushing

Auto flushing of system with water, includes auto water drain. Details on request.

   

Hygiene +: UV sterilization
sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

   

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

   

Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

 

Ancillary Items

   

7 day timer

Allows programming of the machine to make ice at specific times of the day or night.

   

Remote operating switch

When the machine is to be put into an inaccessible place such as in a roofspace and the machine needs to be controlled remotely.

   

Smartcart 240

80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.