Model
|
ZBE 150-SG200 CoolNat
|
ZBE 150-SG200 |
150kg / 24h nominal capacity*
|
at 20°C air and 15°C water
|
Ice storage capacity
|
200kg (0.61m3)
|
Assembled dimensions (W x D x H)
|
762 x 1007 x 2090 mm
|
Assembled weight (empty)
|
185kg
|
cabinet
|
Stainless steel 1.4301
|
Electricity
power consumption
current consumption
|
0.8kW
3.6A
|
1.1kW
5.3A |
Provided by customer
electric supply
fuse, slow-blow
cable cross section, Cu |
1/N/PE ~ 230V 50Hz
13A
1.5mm2 |
Water
supply
drain
provided by customer
pressure
quality
pH value
hardness
temperature
|
¾” BSP
18mm O/D hose (floor drain recommended)
2 – 5 bar
drinking water quality
7.2 – 9.5 pH
6 – 14 °dH
100 – 250mg CaCO3/l
5°C - 30°C
|
Ambient air temperature
|
5°C - 42°C
|
Condenser
air flow
heat emission
|
Air cooled
440 m3/h
2.0kW
|
Air cooled
440 m3/h
1.3kW |
Refrigerant type
Refrigerant charge
ODP
GWP
Tonnes / Co2 equivalent
|
R290
0.112kg
0
3
0.000336
|
R452A
1.0kg
0
2,140
2.14 |
Compressor
refrigeration capacity
evaporation temperature
condensation temperature
|
Fully hermetic
0.69kW
-14°C
36°C
|
Fully hermetic
0.69kW
-16°C
33°C |
Noise level
|
50dBA (3m)
|
Ice discharge
|
B type
|
Shipping dimensions (W x D x H)
|
(0.76 x 0.66 x 0.79m) + (1.32 x 0.91 x 1.64m)
|
Shipping weight
|
(95kg) + (100kg)
|
*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation parameters can all effect ice output.
All product, product specifications and data are subject to change without notice
|
A: Ice machine
B: Ice storage bin
C: Water connection: 3/4" BSP
D: Electrical cable / plug: 2m / UK 3 pin
E: Meltwater drain: 14mm
F: Floor drain (by customer)
The ZBE 150-SG200 ice machine will be delivered according to CE standards and ready for connection to water power and drain.
Includes as standard:
- High pressure pressostat
- Water supply control
- Motor protection for the compressor
- B type ice discharge
- Ice level control by mechanical switch
- 1 x connecting cable 3.5m
- 1 x Flexible 2 metre water supply hose
- 1 x flexible 2 metre drain hose
- 1 x PE ice scoop
- 1 x Ziegra Single water filtration kit
Configuration options
|
|
|
Drain Pump
Pumps the drain water into the site drain if it is too high or far away for gravity drainage. Supplied with a 2 metre flex, it can be directly wired into a fused spur or a plug fitted (not supplied) and plugged into a standard 3 pin socket. Mount on the floor underneath the machine. Not suitable for dusty environments.
|
|
|
|
Condenser options
Water cooled instead of air-cooled: where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible. Requires change to R452a
Water connections: 1/2" Male
Water flow: 110 l/h
Heat emission: 1.3kW
Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated, are colder than 5ºC in winter or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea. Requires change to R452A
Low noise condenser: Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.
|
|
|
|
Frostguard
The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.
|
|
|
Additional Hygiene Options
|
|
|
Hygiene +: Auto water drain
The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.
|
|
|
|
|
|
Hygiene+: UV sterilization
sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.
|
|
|
|
Sanitiser solution: 5litre tub part # ZUK9700044
Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.
|
|
|
|
Spare filter cartridge: #ZUK9700040
Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.
|
|
|
Ancillary Items
|
|
|
7 day timer
Allows programming of the machine to make ice at specific times of the day or night.
|
|
|
|
Smartcart 240
80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.
|
|
|
|
GRP plantroom
A standalone GRP plantroom to protect the ice machine from the elements and thieves when the machine must be mounted outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Only available with remote condener option above.
|
|
|
|
Poly ice shovel
One piece moulded ice shovel in white for the hygienic and rapid removal of ice from boxes, bunkers and bins.
|
|