Ziegra Single water filter (part # ZUK9700039)
 
Ziegra Triple water filter for ice makers

Benefits

  • Reduces water related ice machine problems caused by scale, particulates and dissolved minerals in the mains water supply.
  • Allows fast and easy cartridge change with a 1/4 turn while minimising the possibility of leakage and contamination
  • Simple connection to the water supply and ice machine
  • Valve in head design, so no separate shut off valve required, easy to change for unskilled staff
  • Cartridge change indicator built into the unit
  • Comes complete with all fittings required
  • Quick and easy to install
  • Exhausted cartridges suitable for incineration
 
Installation
  • Choose mounting location suitable to support the weight of the filter
  • Do not connect the system to a water cooled condenser
  • Install vertically with cartridge hanging down and allow 100mm below the bowls for easy cartridge changes
  • Flush new cartridges by running water through them for 1 minute at full flow.
Operation
  • Change cartridges when blocked or after six months, whichever soonest
  • It is recomended that the machine is flushed through with Ziegra Sanitiser during cartridge changes to prevent bacterial contamination of the machine
  • Rotate the cartridge a quarter turn to the left and pull down. Inlet water will automatically turn off.
  • Remove sanitary cap from new cartridge. Install new cartridge with a quarter turn to the right until cartridge comes to a complete stop. Inlet water will automatically turn on.
  • Flush the new cartridges by running water through it for 1 minute at full flow.
  • Check all connections for leaks
  • System is now ready for use.
Application
  • All Ziegra ice machines and ice makers from 30kg up to 375kg
Specifications
  • Inlet connection: 15mm push fit pipe
  • Outlet connection: 3/4" male fitting to take connection hose for easy connection to the machine.
  • Pressure range: min. 2 bar, max. 6 bar
  • Temperature range: 3°C to 38°C
  • Head warranty: 1 year
  • No electrical connection required
Included in the kit
  • Filter head with in-built automatic shut off valve and pressure gauge
  • All in one filter with particle and anti-scale filtration
  • Inlet fitting 15mm push fit (for 15mm copper)
  • Outlet fitting 3/4" male (to accept 3/4" female connector hose)

Order Part # ZUK9700039

Kit Price: £104
Ziegra single kit components
Replacement Cartridges
Ziegra single replacement cartridge
        

Cartridge capacity: 35,000 litres

Order part # ZUK9700040

Price: £50

  

 

 

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel:0844 8808055   Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems