The ZBE700-2-ITS1350 consists of 2 x ZBE350 ice machines on top of an BK400-2 elevated bin and twin cart system. It is a plug in unit and requires only connection to water and mains power supply. The machine stops automatically when the bin is full of ice and re-starts automatically when ice is removed from the bin. The ITS ice storage is an elevated bin and cart system which has gravity assisted ice removal and castered cart to deliver substantial labour and safety benefits. The ITS is poly lined for maximum scale and chlorine resistance and bin access via SmartGATE with powerhinge door. Exterior finish is stainless steel and the insulated ice cart is a hygienic moulded polyethylene with a removeable poly lid. Each unit comes complete with bin, base, 2 carts and ice paddle. |
||||
Specifications
|
||||
| Cabinet: | Stainless steel | |||
| Warranty: | 2 years | |||
| Ice production (24hours): | 2 x 350kg (guaranteed at 20°C air and 15°C water) | |||
| Ice storage | 400kg bin + 2 x Smartcart 240 (109kg) carts = 618kg | |||
| Condenser: | Air cooled (water cooling available on request) | |||
| Voltage: | 240-1-50Hz | |||
| Control voltage: | 240-1-50Hz | |||
| Power consumption: | 2 x 1.6kW | |||
| Current consumption: | 2 x 7.3A | |||
| Refrigerant: | R404A (1.2kg) | |||
| Heat emission: | 2 x 2.6kW | |||
| Noise level: | 2 x 55dBA - 3m | |||
| Water connection: | 2 x 3/4" BSP (minimum water pressure 2bar, maximum 6bar) | |||
| Overflow: | 14mm ø. | |||
| Fuse: | 2 x 13A | |||
| Cable cross section: | 2 x 1.5mm2, Cu. | |||
Machine Connections
|
||||
 |
A. Operating Switch Weight of machine. 90kg |
|
||
Dimensions |
||
|---|---|---|
 |
||
Available Ice Types |
||
MicroIce |
MidiIce |
|
 |
 |
 |
| Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required. | Medium sized chips of ice. Sometimes known as 'flake ice'. |
|
Included with machine |
||
| Ziegra Triple water filtration kit |  |
|
the Ziegra triple water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves. |
||
Other options
|
||
Remote weatherproof or saltwater resistant condenser |
 |
 |
| A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended. | ||
Highly recommended, particularly in hard water areas, |
||
Auto drain down and flushing system |
 |
|
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer. |
||
  |
||
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back. |
||
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel: 0161 429 0525 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |
