ZBE5.000 - 5 tonne flake ice machine

ZBE5.000 flake ice machine (standard and tropical versions)

	The ZBE5.000 is a 5 tonne chip type flake ice machine with a choice of three different sizes of flake. The machine is packaged with refrigeration and controls so is simple to install, the only site work required is the connection of utilities and ice pipe. Standard model guaranteed at 20°C air, 15°C water Tropical model guaranteed at 35°C air, 25°C water It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. Chip type flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.

ZBE5.000 flake ice machine (standard and tropical versions)

The ZBE5.000 is a 5 tonne chip type flake ice machine with a choice of three different sizes of flake. The machine is packaged with refrigeration and controls so is simple to install, the only site work required is the connection of utilities and ice pipe.

Standard model guaranteed at 20°C air, 15°C water

Tropical model guaranteed at 35°C air, 25°C water

It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

Chip type flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.


Specifications
Base frame :	Powder coated
Warranty:	1 year
Ice production (24hours):	5,000kg
Voltage:	400-3-50Hz
Control voltage:	240-1-50Hz
Machine weight:	1,000kg
Shipping dimensions: (wxdxh)	2.08 x 1.86 x 2.20m
Shipping weight:	1,700kg
Power consumption:	16.5W (21.5kW tropical)
Current consumption:	32A (46A tropical)
Refrigerant:	R404A (12kg)
Air-cooled condenser (standard)	airflow sideways, air volume 14,500 m³ / hour
Water-cooled condenser (option)	on request
Heat emission:	40kW (43.2kW tropical)
Noise level:	76dBA
Water connection:	1/2"
Water quality:	Potable: Ph range between 6.5 and 9.5
Overflow:	14mm
Fuse:	80A - Slow
Cable cross section:	16mm2

Specifications

Base frame :

Powder coated

Warranty:

1 year

Ice production (24hours):

5,000kg

Voltage:

400-3-50Hz

Control voltage:

240-1-50Hz

Machine weight:

1,000kg

Shipping dimensions: (wxdxh)

2.08 x 1.86 x 2.20m

Shipping weight:

1,700kg

Power consumption:

16.5W (21.5kW tropical)

Current consumption:

32A (46A tropical)

Refrigerant:

R404A (12kg)

Air-cooled condenser (standard)

airflow sideways, air volume 14,500 m³ / hour

Water-cooled condenser (option)

on request

Heat emission:

40kW (43.2kW tropical)

Noise level:

76dBA

Water connection:

1/2"

Water quality:

Potable: Ph range between 6.5 and 9.5

Overflow:

14mm

Fuse:

80A - Slow

Cable cross section:

16mm2


Dimensions

Dimensions


Ice types available
The ZBE5.000 can make any one of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.
MicroIce	MidiIce	MacroIce

Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.	Medium sized chips of ice. Sometimes known as 'flake ice'.	Large sized chips of ice. Sometimes known as 'flake ice'. The large, thick pieces ensure long life in warm environments.

Ice types available

The ZBE5.000 can make any one of the ice types below, simply state on the order which type of ice you require. The ice type does not effect the price. Click on an image for details and images of each ice type.

MicroIce

MidiIce

MacroIce

Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized chips of ice. Sometimes known as 'flake ice'.

Large sized chips of ice. Sometimes known as 'flake ice'. The large, thick pieces ensure long life in warm environments.


Ice discharge options
To make installation of a machine easy, there are several ice discharge options for this machine. Simply select the one that best matches your installation requirements. Choice of ice discharge does not effect the price.
Type K	Type L	Type M

Type R	Type S	Type T

Ice discharge options

To make installation of a machine easy, there are several ice discharge options for this machine. Simply select the one that best matches your installation requirements. Choice of ice discharge does not effect the price.

Type K

Type L

Type M

Type R

Type S

Type T


Included with machine
Ziegra triple water filtration kit
the Ziegra triple helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.
Water connection hose (part # 970221124)
Water inlet hose to connect from the outlet of the Ziegra triple water filter and the water inlet of the ice machine.
Large ice scoop
A large polymer scoop for hygienic handling of the ice.


Other options
Remote weatherproof or saltwater resistant condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Auto flush cleaning system
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
Smartcart 240
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.
Smartcart 125
57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.
Large polymer ice shovel (white)
One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice
Plant room
A standalone GRP plantroom to protect the ice machine from the elements and for additional security when installing a machine outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to. Min. size required: 2.7 x 2.8 x 2.0m high

Included with machine

Ziegra triple water filtration kit

the Ziegra triple helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Water connection hose (part # 970221124)

Water inlet hose to connect from the outlet of the Ziegra triple water filter and the water inlet of the ice machine.

Large ice scoop

A large polymer scoop for hygienic handling of the ice.

Other options

Remote weatherproof or saltwater resistant condenser

A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.

Auto flush cleaning system

Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.

Smartcart 240

109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.

Smartcart 125

57kg insulated ice transport cart with drain

57kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With integrated hinged lid.

Large polymer ice shovel (white)

One piece moulded ice shovel in white for the hygienic and rapid shovelling of large quantities of ice

Plant room

A standalone GRP plantroom to protect the ice machine from the elements and for additional security when installing a machine outdoors. Arrives fully assembled, needs only a suitable base to bolt it down to.

Min. size required: 2.7 x 2.8 x 2.0m high

Ziegra Ice Machines (UK) Ltd

Tel: 0844 8808055