ZBE375T-200
 
ZBE375T-200 ice machine

The ice machine is a tropical plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.

The bin is of a compact design and construction is of welded steel shell and frame. Interior and exterior finish is stainless steel. This unit is ideal where floorspace is at a premium and is designed to have as small footprint as possible.

The bin is well insulated with 100mm PU foam layer to keep ice good for as long as practically possible and is provided on 50mm high non-adjustable legs. The door is at a convenient height for ice removal from the bottom of the bin.

 
Specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 375kg (guaranteed at 35 °C air and 25 °C water)
Ice storage 200kg
Condenser: Air cooled (water cooling available on request)
Voltage: 240-1-50Hz
Control voltage: 240-1-50Hz
Power consumption: 1.6kW
Current consumption: 7.3A
Refrigerant: R404A (1.2kg)
Heat emission: 2.6kW
Noise level: 55dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Overflow: 14mm ø.
Fuse: 13A
Cable cross section: 1.5mm2, Cu.
 
Connections and Dimensions
ZBE375T-200 ice machine diagram

A. Operating Switch
D. Electric cable/plug
E. Water connection
F. Overflow
G. Filter
H. Stop valve
J. Fuses

Weight of machine. 90kg
Total weight with bin. 165kg

Available Ice Types
MicroIce
MidiIce
 
micro ice midi ice
Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.

Medium sized chips of ice. Sometimes known as 'flake ice'.

 
Included with machine
Ziegra Single Water Filtration Kit
ziegra single water filter for small ice machines

The Ziegra single water filtration unit helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.

Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.

Other options
Remote weatherproof or saltwater resistant condenser
ice machine
Remote condenser
A standard packaged ice machine has the condenser built into it. This is fine in enviroments that are cool and well ventilated, with clean air, however for environments that get hot, dusty or do not have very good ventilation a remote condenser mounted outside the building is the solution. Remote machines must only be professionally installed by persons qualified to do so. Remote condensers come weatherproofed as standard for outside installation, however for applications close to the sea, saltwater resistant Cu/Cu condensers are recommended.
Auto drain down and flushing system
water flushing system
Every Ziegra ice machine has as standard a sealed water system for maximum possible water hygiene. However for applications where hygiene is a high priority, additonal systems can be fitted. Auto water drain down empties the water resovoir every time the machine is switched off, preventing water from stagnating in the tank. Auto water drain down is available separately or with an additional auto flushing system. This system can be pre-set to automatically flush through the water system with clean water at intervals pre-determined by the customer.
ice totesSmartcart 240 ice transport cart
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Also available a set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back.

 

Ziegra Ice Machines (UK) Ltd

Tel: 0161 429 0525

 
Ziegra Ice Machines (UK) Ltd
Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ
Tel: 0161 429 0525    Fax: 0161 480 7927   Email: ice@ziegra.co.uk

Specialists in...
Ice Production, Storage, Handling
and Dosing Systems