ZBE30-10 - 30kg laboratory benchtop ice machine with 10kg storage

ZBE30-10 laboratory benchtop ice machine


The ZBE30-10 consists of a 30kg icemaker with an integrated 10kg insulated storage unit. The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals. The ZBE30-10 is our smallest ice machine and is ideal for benchtop mounting

Specifications
Cabinet:	Stainless steel
Warranty:	5 years
Ice production (24hours):	30kg (guaranteed at 20°C air and 15°C water)
Ice storage	10kg
Condenser:	Air cooled (water cooling available on request)
Voltage:	240-1-50Hz
Control voltage:	240-1-50Hz
Power consumption:	0.4kW
Current consumption:	2.5A
Refrigerant:	R404A (0.6kg)
Heat emission:	0.42kW
Noise level:	45dBA - 3m
Water connection:	3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Overflow:	14mm ø.
Fuse:	13A
Cable cross section:	1.5 mm2, Cu.

Machine connections and dimensions
		D. Electric cable/plug E. Water connection F. Overflow G. Filter H. Stop valve J. Fuses Weight of machine. 60kg


Available Ice Types
MicroIce	MidiIce

Very small chips of ice, sometimes known as 'crushed ice'. The gentlest type of ice for packing delicate products and also where rapid cooling is required.	Medium sized chips of ice. Sometimes known as 'flake ice'.

Included with machine
Ziegra single water filtration kit (part #ZUK9700039)
The Ziegra single helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine. Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.
Options
Drain Pump (part # ZUK9700011)
A pump to assist meltwater drain when the room drain is lower than or at the same level as the drain on the bin. Often used in Laboratory installations.

Tel: 0161 429 0525