The construction of the SG500 is of welded steel shell and frame. The exterior finish is stainless steel front, top, sides, back and bottom. The bin has a non-corroding, seamless polyethylene liner inside. Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength. Lower door assembly has non-corroding poly snout, poly lift door with PowerHinge to eliminate gasket and latches and inner SmartGate to positively control ice flow into the snout area and reduce spillage. The entire lower door assembly can be eailty removed by removing three screws for installation through narrow doors. Upper inspection doors to be double-wall poly to increase durablity and minimize meltage and condensation. Legs adjustable from 152mm to 191mm. The bin drain is 26mm FPT ridid PVC The bin is NSF listed and comes complete with a large ice scoop in hygienic plastic. |
 |
|||
Specifications
|
||||
| Cabinet: | Stainless steel | |||
| Internal finish | Polyethylene | |||
| Ice storage capacity | 500kg | |||
| Overflow: | 14mm ø. | |||
| Weight of unit: | 155kg | |||
| For ice machines: | ZBE550 to ZBE1200T | |||
Bin Dimensions |
||||
|
||||
| Options | |
| SmartCart 240 |  |
| 109kg capacity insulated ice cart with lid, moulded from food safe polymer for maximum hygiene. | |
| Set of six ice totes for SmartCart 240 |  |
A set of six totes to fit inside the cart, 11kg capacity each to make applying ice a little easier on the back. |
|
Drain Pump (part # ZUK9700011) |
 |
| A pump to assist meltwater drain when the room drain is lower than or at the same level as the drain on the bin. | |
Ziegra Ice Machines (UK) Ltd Unit 2, Phoenix Court, Hammond Avenue, Stockport, Cheshire, SK4 1PQ Tel: 0161 429 0525 Fax: 0161 480 7927 Email: ice@ziegra.co.uk |
